Save Time And Effort Using The Paslode Framing Nailer IMCT

The Paslode Framing Nailer IMCT provides you a quick set-up which is user friendly, featuring its lightweight characteristics for efficiently tackling large framing tasks rapidly with no mess performance of nails even with smaller jobs.

When compared to to compressor-based pneumatic nail guns, the cordless IMCT is quite a bit quicker to set-up and enables an extremely moveable operation. There isn't a compressor to lug around or hoses to link. You're able to move easily from location to location inside of job sites without the need to drag or rethread hoses within the site.

The actual set-up of this excellent nail gun is as simple as putting in the battery, a fuel cell, and a nail strip and you're simply able to nail. This can help you save as much as an hour everyday not having to breakdown compressors, hoses as well as to seek out an electrical source

The IMCT nailer will handle nail sizes between 2 to 3 1/4 ins which makes it well suited for many types of framing. Be it 2”x 4” or 1 1/2” x 4” lumber this gun has the ability to change to another size nail. Just pull back the follower rod and remove the strip you're using. Insert a strip of the new size and away you go. Nails are available in 48-nail collated paper strips that can be a cinch to load and unload.

Nails are driven by way of a powerful linear drive internal combustion motor, driven by a disposable fuel cell. The energy this particular gun gives will drive a nail well in to the hardest of hardwood not to mention laminated beams. Each fuel cell will fire in the order of 1200 nails per cell.

A easily removed, rechargeable battery pack controls the nail guns electronics to give you steady performance even with serious nailing jobs. An included stand-alone battery charger needs around 2 hours to totally recharge the battery pack. A fully energized electric battery will work for around 4000 nails. By using a extra battery and many fuel cells, this gun could be used endlessly while driving an average of one nail every 2 seconds.

Yet another awesome time-saving function is the tool-less depth-of-drive adjustment. You do not need a wrench to adjust the depth. Basically take out the battery from your nail gun, and then manually adjust the depth stop at the top of the tool. This be modified either upwards or downwards to the appropriate depth to either under or over drive of the nail.

All operational and service directions are offered in an easy to understand, well-illustrated users manual. There are numerous online resources such as paslodereview.com to make sure that your nail gun is utilized and maintained properly. This in turn will provide you with hundreds of hours of hassle free nailing.

The IMCT framing nailer furthermore saves time when you really need to nail in small rafter corners or squeeze in to other cramped areas. The tool is lightweight and drives nails in well when held in just about any position, and there is no hose to pull behind you and over obstacles.

The Paslode IMTC weighs less than seven lbs ., so does not require lots of effort to make use of day in day out. This will save arm and hand tiredness when nailing all day long, especially when working over your head.

You can grab a Paslode Framing Nailer IMTC for around $300 to $400 on the net and for the bucks is a little investment for mobility, dependability and usability.

The Paslode Framing Nailer IMCT generally is a massive time-saver on significant and little framing projects. For weekend small jobs, it will be the only nailer you will ever need. For large day to day projects, it is quick set-up and flexibility makes it an excellent alternative to compressor based nailer’s.

Go to Paslode Framing Nailer IMTC for further information and a complete evaluation based on years of practical testing and situations.